---
title: Alternative ways to import
description: "## Three options If you cannot use the recommended importer, with an FPS and a CSV ([FPS Import Guide](https://paiyroll.com/kb/fps-import-guide/)), there are three alternative ways to import: - From only an FPS XML, with no employee CSV file. - From only…"
url: "https://paiyroll.com/kb/import-from-only-an-fps-or-hr-or-ta-system/"
updated: "2026-11-20"
category: Preview next release
---

# Alternative ways to import

## Three options

If you cannot use the recommended importer, with an FPS and a CSV ([FPS Import Guide](https://paiyroll.com/kb/fps-import-guide/)), there are three alternative ways to import:

- From only an FPS XML, with no employee CSV file.
- From only a connected HR or time and attendance (T&A) system, with no FPS.
- From only an employee CSV from your previous payroll system, with no FPS.

### Continue the employment, or start a new one

HMRC records an employment for each employee. The employment starts on their start date and ends on their end date.

When you import, each employment can continue, or a new employment can start with HMRC:

|  | Continue existing employment | Start a new employment |
| --- | --- | --- |
| **At HMRC** | The same employment continues | The old employment ends, and a new one starts |
| **Employees are** | Existing employees, not starters | P45 starters |
| **Previous payroll system** | Nothing changes | Each employee becomes a P45 leaver |
| **Year-to-date values** | Imported from an FPS, or zero at the start of the tax year | Zero, plus the P45 values |
| **When (from an FPS)** | At any time | Not used |
| **When (from an HR or T&A system or an employee CSV)** | Only at the start of the tax year | At any time |

From an HR or T&A system or an employee CSV, every employee is a new starter unless you set them as an **Existing employee**.

The preferred way to start is to import an FPS, because payroll then continues from each employee's year-to-date values.

### Missing information

With each option, some information will be missing:

| Information | From an FPS | From an HR or T&A system, or an employee CSV |
| --- | --- | --- |
| **Start date** | Not in the FPS | Uploaded |
| Auto-enrolment Pay Item status (**Migrated status** and **Migrated date**) | Not in the FPS | Not in the system |
| Email address and username | The importer creates fake ones | Uploaded |
| Bank details, if used | Not in the FPS | Uploaded |
| **Previous pay** and **Previous tax** | The importer sets these to zero | Zero. If you start a new employment, each employee is a P45 starter, and the P45 values are not imported: tax code, week 1 or month 1, leaving date, total pay to date, total tax to date, and student and postgraduate loans. |
| Student loan plans | Only if deductions were made | Not in the system |
| Pay Definitions | Some added by the FPS import; others must be added, for example Shifts | Must be added |
| Report Definitions | The importer creates most | From the copied company |
| Recoverables | Not in the FPS | Not in the system |
| Apprenticeship Levy | Not in the FPS | Not in the system |
| Director status | Not in the FPS | Not in the system |
| Employment Allowance used this tax year | Not in the FPS | Not in the system |

## Before you start

### Continue or start a new employment

Decide if each employment continues, or if a new employment starts with HMRC. See "Continue the employment, or start a new one" above.

### P45 leavers

If you start a new employment, every employee starts in paiyroll® as a P45 starter. So you must first set each employee as a P45 leaver in your previous payroll system.

### Works IDs

If you upload from an HR or T&A system, the works ID of each employee must be the same in paiyroll® and in the HR or T&A system. Works IDs can be numeric or alphanumeric.

### Pension file

If your pension provider is NEST, NOW: Pensions or The People's Pension, get the employee file from your provider: see [Get the employee file from your pension provider](https://paiyroll.com/kb/get-the-employee-file-from-your-pension-provider/). You use it in "Auto-enrolment status" below.

If your provider is not one of these, download from your provider, or prepare, a spreadsheet of the auto-enrolment status of all your employees. You use it in "Auto-enrolment status" below.

## Import an FPS with no CSV

### Import

1. Import the FPS, as in [FPS Import Guide](https://paiyroll.com/kb/fps-import-guide/).

### Employee details

1. Click **Employees**, then **Update** for an employee.
2. In the **Main** tab, enter the **Start date**.
3. In the **Main** tab, enter the real **Email address** and **Username**.
4. If you pay by bank, in the **Bank** tab, enter the **Account name**, **Sort code** and **Account number**.
5. Click **Update**.
6. Repeat steps 1 to 5 for each employee.

### Directors

Do these steps only if the company has directors.

1. Click **Employees**, then **Update** for a director.
2. In the **Tax** tab, select **Director**, and enter **Director from**. If you do not know the date, enter 6 April of the current tax year.
3. If the director has cumulative NI, select **Director NI cumulative**.
4. Click **Update**.
5. Repeat steps 1 to 4 for each director.

### Auto-enrolment status

Do these steps only if your pension provider is NEST, NOW: Pensions or The People's Pension. You then do not enter the status of each employee yourself.

1. Click **Setup** > **All Tools** > **Company update AE Pay Items**.
2. For **Company**, select the company.
3. For **Active or All workers**, select the file from your pension provider.
4. If your provider is NEST and you also have a file of inactive employees, select it for **Inactive workers**.
5. Click **Upload**.
6. On the next page, clear **Dry run**.

The **AE** Pay Item of each employee then has the **Migrated status** and **Migrated date** from the file.

If your provider is not one of these, use your spreadsheet in one of these ways:

- Upload the **Migrated status** and **Migrated date** of all employees with a Pay Item workbook: see [Pay Item workbook upload/edit/download](https://paiyroll.com/kb/pay-item-workbook-upload-edit-download/).
- Enter them for each employee, in step 2 of "Pay Items" below.

### Pay Items

1. Click **Pay Item editor**, then select an employee.
2. If you did not upload the auto-enrolment status, in the **AE** Pay Item, enter the **Migrated status** and **Migrated date**. If you cannot see them, click **more**.
3. Click **Show statutory Pay Items**.
4. In the **PAYE** Pay Item, enter the **Previous pay** and **Previous tax**.
5. Repeat steps 1 to 4 for each employee.

### Company

1. Click **Setup** > **Pay Definitions**, and create the Pay Definitions that you need, for example bonus or hours.
2. Click **Setup** > **Report Definitions**, and check each Report Definition, for example the RTI credentials.
3. If you pay by bank, add a bank file Report Definition, as in [Add a bank file](https://paiyroll.com/kb/add-a-bank-file/).
4. If you recovered statutory parental pay (SMP, SPP, SAP, ShPP, SPBP, SPBPNIRE or SNCP), enter it: see "Enter a recovered SMP value" in [Updating state](https://paiyroll.com/kb/updating-state/). Use the same steps for each parental pay, for example, **"SPP"**.
5. If you pay the Apprenticeship Levy, enter it: see "Enter an Apprenticeship Levy value" in [Updating state](https://paiyroll.com/kb/updating-state/).
6. If you claim Employment Allowance, check that it is claimed: see "Employment Allowance" in [Set up a company after an import](https://paiyroll.com/kb/set-up-a-company-after-an-import/).
7. Do the steps in [Set up a company after an import](https://paiyroll.com/kb/set-up-a-company-after-an-import/).

The company is then ready for its first pay run.

## Upload from an HR or T&A system, or an employee CSV, with no FPS

### Upload from an HR or T&A system

1. Click **Setup** > **All Tools** > **Company create or copy**, and copy a company.
2. Click **Setup** > **Report Definitions**, and add the integration for your HR or T&A system.
3. In the integration, for **Add from**, select the test employee of the copied company. Each new employee then gets the standard Pay Items of the test employee. Do not delete the test employee: it gives its Pay Items to each new starter after the upload too.
4. Bring in the employees through the integration with your HR or T&A system.

### Upload from an employee CSV

1. Export an employee CSV from your previous payroll system.
2. Click **Setup** > **All Tools** > **Company create or copy**, and copy a company.
3. Add the **GB Upload workers from CSV** Data feed, and set its **Columns** to match the columns in your employee CSV: see [Uploading workers with a data-feed](https://paiyroll.com/kb/uploading-workers-with-a-data-feed/).
4. For **Add from**, select the test employee of the copied company. Do not delete the test employee: it gives its Pay Items to each new starter after the upload too.
5. If you continue the employment, in **Columns**, add **"existing_employee": "True"**.
6. Click **Add**.
7. Click **Data feeds**, then **Upload...** for the Data feed, and select the employee CSV.

### Existing employees

Do these steps only if you continue the employment from an HR or T&A system. An HR or T&A integration cannot set **existing_employee**, so you set it after the last run of the integration, and before you approve the first pay run.

1. Click **Setup** > **Report Definitions**, then **Update** for the integration.
2. Select **Dry run**, and click **Update**. The integration then cannot change the employees.
3. Create a file with a **works_id** column and an **existing_employee** column. Enter **True** for each employee.
4. Upload the file with **Employee bulk edit**: see [Employee bulk edit](https://paiyroll.com/kb/employee-bulk-edit/).
5. In **Pay runs**, click **Redo** on the running pay run.
6. After you approve the first pay run, clear **Dry run** in the integration. The integration can then bring in new starters and changes again.

### Add the missing information

1. If the company has directors, do the steps in "Directors" above.
2. Do the steps in "Auto-enrolment status" above. (If your provider is not one of those, enter the status as in step 2 of "Pay Items" above.)
3. If you start a new employment, enter the P45 of each employee, as in "P45 details" below.
4. Do the steps in "Company" above.

### P45 details

1. Click **Employees**, then **Update** for an employee.
2. Click the **Tax** tab.
3. Enter the **P45 tax code**.
4. If the P45 shows week 1 or month 1, select **P45 week1 month1**.
5. Enter the **P45 leaving date**.
6. Enter the **P45 total pay to date**.
7. Enter the **P45 total tax to date**.
8. If the P45 shows a student loan, for **P45 continue student loan**, select the plan.
9. If the P45 shows a postgraduate loan, for **P45 continue postgraduate loan**, select **Yes**.
10. Click **Update**.
11. Repeat steps 1 to 10 for each employee.

Sometimes the **GB HMRC DPS** data feed supplies these values: see "Tax codes" in [Set up a company after an import](https://paiyroll.com/kb/set-up-a-company-after-an-import/).

The company is then ready for its first pay run.

## Next steps

- [Import FAQ and Errors](https://paiyroll.com/kb/import-faq/)
